dist/0040700000076500001440000000000007631327562010031 5ustar usersdist/Readme.txt0100600000076500001440000000172407355316006011764 0ustar usersHere is the linux driver of Decision PCI 8in8out card. And this driver is tested well on the kernel with version 2.2.14. To decompress the file: tar -xvzf pci8in8outdist.tgz After you decompress the pci8in8outdist.tgz file, do the following steps: ->1.Login as root. ->2.chmod +x install ->3.chmod +x uninstall ->4.install After you run 4th step , you will see "Register Successful", then it will build a device node in "/dev" named "/dev/dpci16in16out". If you want to remove the driver , please run the 5th step. 5.uninstall Note: You can compile "test.c". It tests output of Decision 8in8out card. Another "test1.c" is used to test input. There are 2 function on this driver: int Write16In16OutPort(int file_desc,char data); - Use to send data. Where: file_desc data - the value to send char Read16In16OutPort(int file_desc); - Use to get data. Where: file_desc - is the file handle For more information please see the dpci8in8out.h dist/test.c0100600000076500001440000000130007355315735011147 0ustar users#include "dpci16in16out.h" #include "dpci16in16outlib.c" #include #include /* open */ #include /* exit */ #include /* Main - Call the ioctl functions */ main() { int file_desc, i,count=0; char buf[255]; char b=1; char *msg = "Message passed by ioctl\n"; sprintf(buf,"/dev/%s0\0",DEVICE_NAME); file_desc = open(buf, O_RDONLY); if (file_desc < 0) { printf ("Can't open device file: %s\n", buf); exit(-1); } Write16In16OutPort(file_desc,0x0); do{ Write16In16OutPort(file_desc,b); b=b<<1; count++; if(count%8==0) b=1; sleep(1); } while(count<1000); close(file_desc); } dist/test1.c0100600000076500001440000000114007355315744011232 0ustar users#include "dpci16in16out.h" #include "dpci16in16outlib.c" #include #include /* open */ #include /* exit */ #include #include /* Main - Call the ioctl functions */ main() { int file_desc,data,i,j=0; char buf[255]; sprintf(buf,"/dev/%s0\0",DEVICE_NAME); file_desc = open(buf, O_RDONLY); if (file_desc < 0) { printf ("Can't open device file: %s\n", buf); exit(-1); } printf("\n I write %02x ",Write16In16OutPort(file_desc,0x5065)); j=Read16In16OutPort(file_desc); printf("I read %02x\n",j); close(file_desc); } dist/install0100700000076500001440000000114007355315727011421 0ustar users#!/bin/sh module="dpci16in16out" device="dpci16in16out" group="root" mode="664" major="165" # invoke insmod with all arguments we got /sbin/insmod -f $module.o $* || exit 1 #major=`cat /proc/devices | awk "\\$2==\"$module\" {print \\$1}"` # Remove stale nodes and replace them, then give gid and perms # Usually the script is shorter, it's scull that has several devices in it. rm -f /dev/${device}[0-3] mknod /dev/${device}0 c $major 0 mknod /dev/${device}1 c $major 1 mknod /dev/${device}2 c $major 2 mknod /dev/${device}3 c $major 3 chgrp $group /dev/${device}[0-3] chmod $mode /dev/${device}[0-3] dist/uninstall0100700000076500001440000000026607355315756011776 0ustar users#!/bin/sh module="dpci16in16out" device="dpci16in16out" # invoke rmmod with all arguments we got /sbin/rmmod $module $* || exit 1 # Remove stale nodes rm -f /dev/${device}[0-3] dist/dpci16in16out.h0100600000076500001440000000067607355315721012523 0ustar users #ifndef DPCI16IN16OUT_H #define DPCI16IN16OUT_H #include #define dpci16in16out_major 165 #define MAXCARD 4 #define REGIONLENGTH 8 #define DPCI16IN16OUT_WRITE_PORT _IOW(dpci16in16out_major, 0 , int) #define DPCI16IN16OUT_READ_PORT _IOR(dpci16in16out_major, 1 , int) #define DEVICE_NAME "dpci16in16out" int Read16In16OutPort(int file_desc); int Write16In16OutPort(int file_desc,int data); #endif dist/dpci16in16outlib.c0100600000076500001440000000053407355315721013176 0ustar users#include "dpci16in16out.h" #include /* ioctl */ int Write16In16OutPort(int file_desc, int value) { int ret_val; ret_val = ioctl(file_desc, DPCI16IN16OUT_WRITE_PORT, value); return ret_val; } int Read16In16OutPort(int file_desc) { int ret_val=0; ioctl(file_desc, DPCI16IN16OUT_READ_PORT, &ret_val); return ret_val; } dist/dpci16in16out.o0100600000076500001440000000734007625705121012522 0ustar usersELF4( UEf@*%;} 1 t&ÐU  1UEPRR*9Et *t&;}fM vÐUE9Eu 1 ÐUUff%U BÍvUU BUU EffÉUVSE]uf@*ȁ@t t>UEjEPQ#j]SQJUFS1e[^UWVSE1@P@Ѓ~ h@vu vVh%hffƃ tRUF8$;Phj4;|hj4; E}~u}hqURhUhhhE})1;}j4C;|Eh@1e[^_ÐUS1;} j4C;|hhh]L801.01kernel_version=2.2.14-3.0author=Deltadescription=Decision PCI 16in/16out Card DriverDisabling CPUID Serial number...done. <3>This drive only can open one time. Deicision PCI 16in/16out card:I got a base %x dpci16in16out I can't find any Decision PCI 16in/16out card here!! Decision PCI 16in/16out card: Total %d cards that I catched! Decision PCI 16in/16out card:Register Successful Decision PCI 16in/16out card:Unregister Successful!! GCC: (GNU) egcs-2.91.66 19990314/Linux (egcs-1.1.2 release).symtab.strtab.shstrtab.text.rel.text.data.rel.data.bss.note.modinfo.rodata__ksymtab.comment@(! H p +D 1 ( ;@Fp O` Wa=Sj`  P  48JLK]q@@ 7- . t4A Q@0fOrLdpci16in16out.cgcc2_compiled.dpci16in16out_cardsdpci16in16out_releasedpci16in16out_readdpci16in16out_writedpci16in16out_fopsdev_count.460dpci16in16out_rev__module_kernel_versiondpci16in16out_open__this_moduledpci16in16out_Base_Addrdpci16in16out_Myreaddpci16in16out_Mywritedpci16in16out_ioctl__put_user_1__module_author__module_descriptioninit_modulepcibios_presentpci_find_deviceprintkcheck_regionrequest_regionregister_chrdevrelease_regioncleanup_moduleunregister_chrdev"=Cr|t! -7!RWgluz"## %$dist/test2.c0100600000000000000000000000173407630615147011733 0ustar rootroot#include "dpci16in16out.h" #include "dpci16in16outlib.c" #include #include /* open */ #include /* exit */ #include /* Main - Call the ioctl functions */ main() { int file_desc, i,j,count=0; char buf[255]; int b=1; char *msg = "Message passed by ioctl\n"; sprintf(buf,"/dev/%s0\0",DEVICE_NAME); file_desc = open(buf, O_RDONLY); if (file_desc < 0) { printf ("Can't open device file: %s\n", buf); exit(-1); } Write16In16OutPort(file_desc,0x0); printf("Input 1 to 16 to test:\n"); printf("Input 0 to single-off:\n"); printf("Input else number to end test:\n"); j=0; while(0 <= j <= 16) { scanf("%d",&j); if (j==0){ Write16In16OutPort(file_desc,0); } if (j<=16){ b=1; b=b<<(j-1); Write16In16OutPort(file_desc,b); sleep(1); } else { break; } } Write16In16OutPort(file_desc,0x0); printf("Finish test\n"); close(file_desc); }