dist/0040700000076500001440000000000007633051702010021 5ustar usersdist/dpciindust.h0100600000076500001440000000107707460276124012351 0ustar users #ifndef DPCIINDUST_H #define DPCIINDUST_H #include #define dpciindust_major 159 #define MAXCARD 8 #define REGIONLENGTH 8 #define DPCIINDUST_WRITE_PORT _IOW(dpciindust_major, 0 , int) #define DPCIINDUST_READ_PORT _IOR(dpciindust_major, 1 , int) #define DPCIINDUST_SELECT_PORT _IOW(dpciindust_major, 2 , int) #define DEVICE_NAME "dpciindust" #define PORT1 0 #define PORT2 1 #define PORT3 2 #define PORT4 3 int ReadPciIndustPort(int file_desc,int port); int WritePciIndustPort(int file_desc,int port,int data); #endif dist/dpciindustlib.c0100600000076500001440000000072407460272255013032 0ustar users#include "dpciindust.h" #include /* ioctl */ int WritePciIndustPort(int file_desc, int port,int value) { int ret_val; ret_val = ioctl(file_desc, DPCIINDUST_SELECT_PORT, port); ret_val = ioctl(file_desc, DPCIINDUST_WRITE_PORT, value); return ret_val; } int ReadPciIndustPort(int file_desc, int port) { int ret_val=0; ioctl(file_desc, DPCIINDUST_SELECT_PORT, port); ioctl(file_desc, DPCIINDUST_READ_PORT, &ret_val); return ret_val; } dist/dpciindust.o0100600000076500001440000001036007632275643012361 0ustar usersELF@4(UEf@@;|Ð 1쐉U  1UEP R9ER@tÐ;|E UE 9EHÐUWVSM ]94xffAAff[^_ÐUM SAQ]f Qf$ÐUSQEUf@@@]@w4@t1]RjEEP]Q]։u̠EPjEPQ!9B uEC9B ɉuECxmUWVS H@11HH~ he[^_ÐtPWhhfftVPh@ j4hxhj4hF뇅Vh hhh5x" h11;}#vWj4hC;| haTUSP1;|%hh$@]ÉPj4hC;|H4kernel_version=2.4.18-14author=Deltadescription=Decision PCI Industrial Card Driverlicense=GPL <3>This drive only can open one time. Deciision PCI Industrial card:I got a base %x Decision PCI Industrial card: Total %d cards that I catched! Decision PCI Industrial card:Register Successful I can't find any Decision PCI Industrial card here!! Decision PCI Industrial card:Unregister Successful!! dpciindustGCC: (GNU) 3.2 20020903 (Red Hat Linux 8.0 3.2-7).symtab.strtab.shstrtab.rel.text.rel.data.bss.modinfo__ksymtab.rel.fixup.rel__ex_table.rodata.str1.32.rodata.str1.1.comment4 )L % (/L4`| =KG VR   a2v q2v 3   &74JHDZk zHp H  ulV1 G   93,D T@0ipulVdpciindust.c__module_kernel_versiondpciindust_cardsdpciindust_releasedpciindust_readdpciindust_writedpciindust_revdpciindust_fops__module_licensedev_count.0dpciindust_initdpciindust_exitdpciindust_open__this_moduledpciindust_Base_Addrdpciindust_Myreaddpciindust_OutStatedpciindust_Mywritedpciindust_ioctl__module_author__module_descriptionprintkpcibios_presentpci_find_deviceioport_resource__check_region__request_regionregister_chrdev__release_regionunregister_chrdevinit_modulecleanup_module"(9?jzi -!<Z"t} #$#% &  .3#9'BSu( #'  (   dist/install0100700000076500001440000000113207460272255011415 0ustar users#!/bin/sh module="dpciindust" device="dpciindust" group="root" mode="664" major="159" # invoke insmod with all arguments we got /sbin/insmod -f $module.o $* || exit 1 #major=`cat /proc/devices | awk "\\$2==\"$module\" {print \\$1}"` # Remove stale nodes and replace them, then give gid and perms # Usually the script is shorter, it's scull that has several devices in it. rm -f /dev/${device}[0-3] mknod /dev/${device}0 c $major 0 mknod /dev/${device}1 c $major 1 mknod /dev/${device}2 c $major 2 mknod /dev/${device}3 c $major 3 chgrp $group /dev/${device}[0-3] chmod $mode /dev/${device}[0-3] dist/Readme.txt0100600000076500001440000000173007460272255011765 0ustar usersHere is the linux driver of Decision PCI Industrial card. And this driver is tested well on the kernel with version 2.4.3-20mdk. To decompress the file: tar -xvzf pciindustdist.tgz After you decompress the pciindustdist.tgz file, do the following steps: ->1.Login as root. ->2.chmod +x install ->3.chmod +x uninstall ->4.install After you run 4th step , you will see "Register Successful", then it will build a device node in "/dev" named "/dev/dpciindust". If you want to remove the driver , please run the 5th step. 5.uninstall Note: You can compile "test.c". It tests output of Decision Industial card. Another "test1.c" is used to test input. There are 2 function on this driver: int WritePciIndustPort(int file_desc,char data); - Use to send data. Where: file_desc data - the value to send char ReadPciIndustPort(int file_desc); - Use to get data. Where: file_desc - is the file handle For more information please see the dpciindust.h dist/uninstall0100700000076500001440000000026007460272255011761 0ustar users#!/bin/sh module="dpciindust" device="dpciindust" # invoke rmmod with all arguments we got /sbin/rmmod $module $* || exit 1 # Remove stale nodes rm -f /dev/${device}[0-3] dist/16photo_test.c0100600000000000000000000000113307633032016013211 0ustar rootroot#include "dpciindust.h" #include "dpciindustlib.c" #include #include /* open */ #include /* exit */ #include #include /* Main - Call the ioctl functions */ main() { int file_desc,data,i,j=0; char buf[255]; sprintf(buf,"/dev/%s0\0",DEVICE_NAME); file_desc = open(buf, O_RDONLY); if (file_desc < 0) { printf ("Can't open device file: %s\n", buf); exit(-1); } WritePciIndustPort(file_desc,PORT1,0); printf("I read 0x%04x\n",(unsigned int)ReadPciIndustPort(file_desc,PORT1)); sleep(1); close(file_desc); } dist/16relay_test1.c0100600000000000000000000000105507633030435013263 0ustar rootroot#include "dpciindust.h" #include "dpciindustlib.c" #include #include /* open */ #include /* exit */ #include #include /* Main - Call the ioctl functions */ main() { int file_desc,data,i,j=0; char buf[255]; sprintf(buf,"/dev/%s0\0",DEVICE_NAME); file_desc = open(buf, O_RDONLY); if (file_desc < 0) { printf ("Can't open device file: %s\n", buf); exit(-1); } WritePciIndustPort(file_desc,PORT1,0x1234); printf("I write 0x1234\n"); sleep(1); close(file_desc); } dist/16relay_test2.c0100644000000000000000000000203207633047245013277 0ustar rootroot#include "dpciindust.h" #include "dpciindustlib.c" #include #include /* open */ #include /* exit */ #include /* Main - Call the ioctl functions */ main() { int file_desc, i,j,count=0; char buf[255]; int b=1; char *msg = "Message passed by ioctl\n"; sprintf(buf,"/dev/%s0\0",DEVICE_NAME); file_desc = open(buf, O_RDONLY); if (file_desc < 0) { printf ("Can't open device file: %s\n", buf); exit(-1); } WritePciIndustPort(file_desc,PORT1,0x0f); printf("Input 1 to 16 to test porta1 led\n"); printf("Input 0 to light-off led\n"); printf("Input else number to end test\n"); WritePciIndustPort(file_desc,PORT1,0); j=0; do{ scanf("%d",&j); if (j==0){ WritePciIndustPort(file_desc,PORT1,0); } else if(j<=16){ b=1; b=b<<(j-1); WritePciIndustPort(file_desc,PORT1,b); } else { WritePciIndustPort(file_desc,PORT1,0); } } while(j<17); printf("End test.\n"); close(file_desc); } dist/16relay_test.c0100600000000000000000000000130707633010451013176 0ustar rootroot#include "dpciindust.h" #include "dpciindustlib.c" #include #include /* open */ #include /* exit */ #include /* Main - Call the ioctl functions */ main() { int file_desc, i,count=0; char buf[255]; int b=1; char *msg = "Message passed by ioctl\n"; sprintf(buf,"/dev/%s0\0",DEVICE_NAME); file_desc = open(buf, O_RDONLY); if (file_desc < 0) { printf ("Can't open device file: %s\n", buf); exit(-1); } WritePciIndustPort(file_desc,PORT1,0x0f); do{ if(count%16==0) b=1; WritePciIndustPort(file_desc,PORT1,b); b=b<<1; count++; sleep(1); } while(count<1000); close(file_desc); } dist/8photo_8relay_test1.c0100600000076500001440000000146507632310051014011 0ustar users#include "dpciindust.h" #include "dpciindustlib.c" #include #include /* open */ #include /* exit */ #include #include /* Main - Call the ioctl functions */ main() { int file_desc,data,i,j=0; char buf[255]; sprintf(buf,"/dev/%s0\0",DEVICE_NAME); file_desc = open(buf, O_RDONLY); if (file_desc < 0) { printf ("Can't open device file: %s\n", buf); exit(-1); } WritePciIndustPort(file_desc,PORT1,0x6500); printf("I write 0x6500\n"); sleep(1); printf("I read 0x%04x\n",(unsigned int)ReadPciIndustPort(file_desc,PORT1)); sleep(1); WritePciIndustPort(file_desc,PORT1,0x6500); printf("I write 0x6500\n"); sleep(1); printf("I read 0x%04x\n",(unsigned int)ReadPciIndustPort(file_desc,PORT1)); close(file_desc); } dist/8photo_8relay_test2.c0100644000000000000000000000176307632311761014527 0ustar rootroot#include "dpciindust.h" #include "dpciindustlib.c" #include #include /* open */ #include /* exit */ #include /* Main - Call the ioctl functions */ main() { int file_desc, i,j,count=0; char buf[255]; int b=1; char *msg = "Message passed by ioctl\n"; sprintf(buf,"/dev/%s0\0",DEVICE_NAME); file_desc = open(buf, O_RDONLY); if (file_desc < 0) { printf ("Can't open device file: %s\n", buf); exit(-1); } WritePciIndustPort(file_desc,PORT1,0x0f); printf("Input 1 to 8 to test porta1 led\n"); printf("Input 0 to light-off led\n"); printf("Input else number to end test\n"); j=0; do{ scanf("%d",&j); if (j==0){ WritePciIndustPort(file_desc,PORT1,0); } else if(j<=8){ b=0x0100; b=b<<(j-1); WritePciIndustPort(file_desc,PORT1,b); } else { WritePciIndustPort(file_desc,PORT1,0); } } while(j<9); printf("End test.\n"); close(file_desc); } dist/8photo_8relay_test.c0100600000000000000000000000131307632314267014430 0ustar rootroot#include "dpciindust.h" #include "dpciindustlib.c" #include #include /* open */ #include /* exit */ #include /* Main - Call the ioctl functions */ main() { int file_desc, i,count=0; char buf[255]; int b=1; char *msg = "Message passed by ioctl\n"; sprintf(buf,"/dev/%s0\0",DEVICE_NAME); file_desc = open(buf, O_RDONLY); if (file_desc < 0) { printf ("Can't open device file: %s\n", buf); exit(-1); } WritePciIndustPort(file_desc,PORT1,0x0f); do{ WritePciIndustPort(file_desc,PORT1,b); b=b<<1; count++; if(count%8==0) b=0x0100; sleep(1); } while(count<1000); close(file_desc); }