Creating Web-Based Data Acquisition Appliances
Installation Web Data Acquisition Server
Web DAQ DIY

This install CD is prepare for i810, SiS730s or Geode (Cyrex CS5530A) Main board chipset.

If your main board not in this list; please contact Tranzview technical support team, requisite special customer made install CD.



Install Tranzview Embedded Web Server


Step 0: Prepare Hardware
PC
PCCOM Serial Communication Card
Smatelab Digital Isolator Input and Output card
Video Capture Card
AD/DA card
 

Step 1: a. Turn ON PC power.

b. Put CD in CD ROM Driver.




tvaudio: found pic16c54 (PV951)

bttv3: i2c attach [client=pic16c54 (PV951),ok]

i2c-core.o: client [pic16c54 (PV951)] registered to adapter [bt848 #3](pos.

tuner: probing bt848 #3 i2c adapter [id=0x10005]

i2c-core.o: adapter bt848 #3 registered as adapter 3.

bttv3: registered device video3

bttv3: registered device vbi3

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 2048 buckets, 16Kbytes

TCP:Hash tables configured (established 16384 bind 16384)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

NET4: Ethernet Bridge 008 for NET4.0

RAMDISK: Compressed image found at block 0

Freeing initrd memory: 341k freed

VFS: Mounted root (ext2 filesystem).

Freeing unused kernel memory: 260k free

root /dev/hdc

BusyBox v0.60.3 (2002.06.20-18:01+0000) Built-in shell (ash)

Enter 'help' for a list of built-in commands.

sh: can't access tty; job control turned off

Step 2: Key in

#Install



Start Installing Tranzview System



***** HardDisk Configuration *****



HardDisk on /dev/hda will now be partitioned.


Step 3: Key in



Do you wish to continue? (yes/no):Yes



Please keyin a number of the first partition size.(MB)



Step 4: Key size of partition, default is 45.



The size needs over 45MB:45



=========== partition list ====================

Device Boot Start End Blocks Id

/dev/hda0 1 46 46336+ 83

/dev/hda1 47 124 78624 83



------------- after rebuilt ------------------

/dev/hda0

boot_ind 0 head 1 sector 1 cyl 0 sys_ind 83

end_head 0 end_sector 1 end_cyl 0

start4 63 size4 92673

/dev/hda1

boot_ind 0 head 0 sector 1 cyl 46 sys_ind 83

end_head 31 end_sector 63 end_cyl 123

start4 92736 size4 157248

-------------------------------------------------

Writing partition table

hda: hda1 hda2

Reload partition table and syncing...

making filesystem for /dev/hda1

mke2fs 1.27 (8-Mar-2002)

making filesystem for /dev/hda2

mke2fs 1.27 (8-Mar-2002)

Please select motherboard Chip.



Step 5: Please select motherboard Chipset.

1. i810: Intel i810 Chipset

http://www.intel.com/design/chipsets/810
/



2: SiS730s: SiS730s Chipset

http://www.sis.com/products/chipsets/integrated/socketa/730s.htm




3: Geode(Cyrex CS5530A):

http://www.akumeka.com/embedded/index.html?target=Embedded_SBC.html




1.i810 2:SiS730s 3:Geode(Cyrex CS5530A)
Please select your chipset, Key in 1 or 2 or 3.



./server/classes/

./server/run

./server/runfb

./ttyp0

./var/

./var/lib/

./var/lib/mysql/

./var/lib/mysql/mysql.sock

./var/log/

./var/run/

./var/lock/

./var/lock/subsys/

./var/lock/subsys/mysql

./var/lock/subsys/random

./var/var/

./var/var/proftpd/

./var/var/proftpd/proftpd-183

Added DOM *

rootfs on / type rootfs (rw)

/dev/ram0 on / type ext2 (rw)

/proc on /proc type proc (rw)

/dev/hdc on /mnt type iso9660 (ro)

/dev/hda1 on /mnt/mnt type ext2 (rw)

/dev/hda2 on /mnt/tmp type ext2 (rw)


Step 6: Please enter yes

Do you wish to continue? (yes/no):Yes



Step 7: Completed Tranzview System installed.

Tranzview System has been successfully installed.

The system will shutdown.

The network setting as follows:

IP 192.168.1.47

Gateway 192.168.1.1

Netmask 255.255.255.0

DNS 61.13.26.195

The superuser is "root".

The password is "123456".

#



Step 8: Turn OFF power and turn ON power again, Tranzview will be start.