Creating Web-Based Digital Video Recorder Systems

Step 1: Prepare Hardware
1, 4 , 8 Multi Channels Video Input

Step 2: Install Tranzview Server :

Step 1: a. Turn ON PC power.

b. Put CD in CD ROM Driver.

tvaudio: found pic16c54 (PV951)

bttv3: i2c attach [client=pic16c54 (PV951),ok]

i2c-core.o: client [pic16c54 (PV951)] registered to adapter [bt848 #3](pos.

tuner: probing bt848 #3 i2c adapter [id=0x10005]

i2c-core.o: adapter bt848 #3 registered as adapter 3.

bttv3: registered device video3

bttv3: registered device vbi3

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 2048 buckets, 16Kbytes

TCP:Hash tables configured (established 16384 bind 16384)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

NET4: Ethernet Bridge 008 for NET4.0

RAMDISK: Compressed image found at block 0

Freeing initrd memory: 341k freed

VFS: Mounted root (ext2 filesystem).

Freeing unused kernel memory: 260k free

root /dev/hdc

BusyBox v0.60.3 (2002.06.20-18:01+0000) Built-in shell (ash)

Enter 'help' for a list of built-in commands.

sh: can't access tty; job control turned off

Step 2: Key in


Start Installing Tranzview System

***** HardDisk Configuration *****

HardDisk on /dev/hda will now be partitioned.

Step 3: Key in

Do you wish to continue? (yes/no):Yes

Please keyin a number of the first partition size.(MB)

Step 4: Key size of partition, default is 45.

The size needs over 45MB:45

=========== partition list ====================

Device Boot Start End Blocks Id

/dev/hda0 1 46 46336+ 83

/dev/hda1 47 124 78624 83

------------- after rebuilt ------------------


boot_ind 0 head 1 sector 1 cyl 0 sys_ind 83

end_head 0 end_sector 1 end_cyl 0

start4 63 size4 92673


boot_ind 0 head 0 sector 1 cyl 46 sys_ind 83

end_head 31 end_sector 63 end_cyl 123

start4 92736 size4 157248


Writing partition table

hda: hda1 hda2

Reload partition table and syncing...

making filesystem for /dev/hda1

mke2fs 1.27 (8-Mar-2002)

making filesystem for /dev/hda2

mke2fs 1.27 (8-Mar-2002)

Please select motherboard Chip.

Step 5: Please select motherboard Chipset.

1. i810: Intel i810 Chipset

2: SiS730s: SiS730s Chipset

3: Geode(Cyrex CS5530A):

1.i810 2:SiS730s 3:Geode(Cyrex CS5530A)
Please select your chipset, Key in 1 or 2 or 3.


















Added DOM *

rootfs on / type rootfs (rw)

/dev/ram0 on / type ext2 (rw)

/proc on /proc type proc (rw)

/dev/hdc on /mnt type iso9660 (ro)

/dev/hda1 on /mnt/mnt type ext2 (rw)

/dev/hda2 on /mnt/tmp type ext2 (rw)

Step 6: Please enter yes

Do you wish to continue? (yes/no):Yes

Step 7: Completed Tranzview System installed.

Tranzview System has been successfully installed.

The system will shutdown.

The network setting as follows:





The superuser is "root".

The password is "123456".


Step 8: Turn OFF power and turn ON power again, Tranzview will be start.